Mono Air Compressor Pumps


NEC Mono Air Compressor Pumps are designed for domestic , Industrial and agricultural purposes are provided with high operating efficiency compressor that can draw water from depths of 100 ft. to 600 ft.They are assembled with special duty Compressor Motor for quality & reliability and manufactured and
Tested to high standards of excellence.

Compressor pumps are sound in design and robust in construction which assures a reliable performance.


The Compressor Pump which draws the water works on the principle of difference of two inter
Connected water columns; the heavier one. On balancing over the light one. On operation the compressed
air is pumped down the well and gets mixed with water in the discharge pipe as very fine air bubbles by the
Air distributor installed at the end of the Air pipe line. The air water mixture having a low density than the
surrounding water column rises in the discharge pipe. The air distributor should be 10 mm or less in diameter for efficient air water mixture. The outlet from the discharge pipe must not be connected to the
long conveyance pipe since this will cause hammering when the water is ejected out due to large air pockets formed during the horizontal travel of air water mixture in the pipe.

4 replies on “Mono Air Compressor Pumps”

Your article is really nice..

We Tipo Heat Exchangers are the leading manufacturers all types of industrial FRP Cooling Tower, Timber Cooling Tower, Dry Cooling Tower, Forced Draft Cooling Tower, Cross Flow cooling tower, Closed Circuit Cooling Tower in India. We are CTI Certified Cooling Tower Design in India. Our product ranges are Bottle Shape FRP Cooling Tower, Square Shape FRP Cooling Tower, Single Cross Flow, Double Cross Flow, mechanical, Atmospheric, Fanless Cooling Tower, Wooden Induced Draft Cross Flow, Dry Cooling Tower, Forced Draft Cooling Tower, RCC – Reinforced Concrete Cooling Tower closed circuit and open circuit. All Types of Cooling Tower Spares, Fills, Fans, chemicals and Heat Exchangers.